Dubstepforum.com

shortinos wrote:

Velocity.

EDIT: or clone just instrument and automate just volume of instrument.

how do you remove mixer routing i accidentally routed a channel to another channel and i want to put it back to it self instead any help would be awesome

back to itself? you can't route feedback loops in FL, sadly. All the channels are routed to the master by default, use the little arrows above the disk and FX icon in the bottom of the mixer.

five-ohh-what wrote:how do you remove mixer routing i accidentally routed a channel to another channel and i want to put it back to it self instead any help would be awesome

Select the channel you want to "un-route" and the channel it is currently routed to will have a little orange arrow thingy at the bottom of the strip, click this arrow and it will disable the send to this channel.

Alternativley i think u can just right click the arrow at the bottom of the master and select "route to this channel only"

Hope ive been of help?

Is It Possible to import logic projects into fl or the other way round?
if so how?
safe holda x

does any one know of a way to set up the fruity slicer so that it ony uses the major keys on my midi keyboard

Use slicex.

I too use 3XOSC for my basses. just use your own shapes and play around with effects.

meer wrote: Use slicex.

pimping thanks

here is a flp file with a bunch of bass patches i have made figured since i have already used them id pass them on for others to play with

3xosc patchs.flp - 0.20MB

also i want to start wrapping my head around using sytrus for some bass patches any body willing to kick down any sytrus patches they have made i just work better in a visual medium

Sure, how about a reese?
sytrus_fuckedreese.fst

Hi peeps, I've been producing using FL studio now for about 2 and a half years. I'm fairly happy with some of my tracks but I'm looking for some good software compressors/limiters and things like that to improve the sound of individual noises and samples as well as that of the entire track in general... I've been fiddling around with the demo of 'Maximus' and I think this may be exactly what I am looking for - anyone else have experience with this and/or would recommend it? If not what would you recommend?

Thanks.

unwind wrote:Hi peeps, I've been producing using FL studio now for about 2 and a half years. I'm fairly happy with some of my tracks but I'm looking for some good software compressors/limiters and things like that to improve the sound of individual noises and samples as well as that of the entire track in general... I've been fiddling around with the demo of 'Maximus' and I think this may be exactly what I am looking for - anyone else have experience with this and/or would recommend it? If not what would you recommend?

Thanks.

how have you been using fl for 2 years and not accidentally stumbled across the fruity limiter well that no mater use the fruity limiter it is the ish

What is the best way for me to moniter Hz/Hertz in FL 9 ? My monitors are at the cheap end of things and are not great for monitoring sub bass so I want to keep an eye on the frequencies in FL also.

thanks!

jyro wrote:What is the best way for me to moniter Hz/Hertz in FL 9 ? My monitors are at the cheap end of things and are not great for monitoring sub bass so I want to keep an eye on the frequencies in FL also.

thanks!

Stick a parametric EQ on the Master and use it to monitor what's going on and where. If you notice a spike that you can't pin down what it is, go through the soloing elements of the tune one by one until you find the culprit.


NB - This is more practical if you've got a dual screen setup as you can dedicate one entire screen to the EQ is required.

thanks man - will try that out!

also curious - what effects do folks OSX3 for subbass like to apply?

My usual is bit crusher, soundgoodizer (a little), and fruity limiter.

jyro wrote:also curious - what effects do folks OSX3 for subbass like to apply?

My usual is bit crusher, soundgoodizer (a little), and fruity limiter.

TBH, I don't often apply any effects to my sub bass. Just a sine wave with maybe a tiny bit of compression/EQ if required

I find that without a limiter and some extra gain (thanks to bitcrusher) I just cant get enough drive out of my sub bass