Page 1 of 1
Posted: Sat Sep 05, 2009 11:11 pm
by whineo
assign the lfo to the volume
Posted: Sat Sep 05, 2009 11:19 pm
by yong
Volume and MAYBE a LITTLE bit to pitch.
Posted: Sat Sep 05, 2009 11:31 pm
by slothrop
Or use two detuned sine waves together - the phase cancellation causes a kind of wobble effect...
Posted: Sat Sep 05, 2009 11:35 pm
by reignstep
Don't use wobblz for subs ;<
Posted: Sat Sep 05, 2009 11:41 pm
by collige
lfo->distortion
Posted: Sat Sep 05, 2009 11:52 pm
by yunomi donchu
Reignz wrote:Don't use wobblz for subs ;<
+1 play it.
Posted: Sun Sep 06, 2009 12:52 am
by grooki
Whineo wrote:assign the lfo to the volume
this is what I do when i want a wobble on the sub. i would definitely use a wobble on the sub if you have strong mid range wobbles. Often in peoples tracks you can hear the sub quite seperately from the wobbles, I prefer it when the sound sounds completely unified.
you don't need much wobble on the sub though, just a little bit to give it some movement (in time with the mids, if you have em).
but, whatever, go nuts
Re: How to make a sub-bass wobble?
Posted: Sun Sep 06, 2009 4:32 am
by corpu5
dkdubz wrote:
Also isnt it possible to automate the LFO when its synced??? cant seem to find a way to do this.. (ableton live)
yea man, go into arangment mode....then bring up massive, click the ratio box that changes the speed of the lfo (like 1/8 1/4 etc) and a pink line should show up saying massive modular .... bingo
Posted: Sun Sep 06, 2009 6:49 am
by lowpass
Either
1.LFO -> volume (already mentioned)
2.Have 2 waves (Sine,Tri/Square) then have the filter set really low, it will give you a really low wobble but without the midrange if done right
Posted: Sun Sep 06, 2009 11:54 am
by sunnyb
Slothrop wrote:Or use two detuned sine waves together - the phase cancellation causes a kind of wobble effect...
Posted: Sun Sep 06, 2009 1:01 pm
by tripaddict
lfo > cutoff on 12db lpf filter
set the range to about 10%
play with the settings till you get the wobble you want
or you could apply it to the volume, there's loads of ways to make stuff wobble
just learn how to use the lfo's to control different settings ie. pitch / seperation / cutoff and res. etc
then use multiple lfo's for some crazy wobz
Posted: Sun Sep 06, 2009 1:08 pm
by Brisance
TripAddict wrote:lfo > cutoff on 12db lpf filter
set the range to about 10%
play with the settings till you get the wobble you want
or you could apply it to the volume, there's loads of ways to make stuff wobble
just learn how to use the lfo's to control different settings ie. pitch / seperation / cutoff and res. etc
then use multiple lfo's for some crazy wobz
on a sine wave its the same as LFO->volume
Posted: Sun Sep 06, 2009 3:05 pm
by darkmatteruk
2 sines detuned by 33 cents in the opposite direction to each other can be pretty cool
Posted: Sun Sep 06, 2009 5:35 pm
by Sharmaji
or just get a big, nasty, full-frequency midrange wob going---one that's got a ton of low-end in it-- and lowpass.