What sort of amplifier do I need for my two 150w Speakers?

hardware, software, tips and tricks
Forum rules
By using this "Production" sub-forum, you acknowledge that you have read, understood and agreed with our terms of use for this site. Click HERE to read them. If you do not agree to our terms of use, you must exit this site immediately. We do not accept any responsibility for the content, submissions, information or links contained herein. Users posting content here, do so completely at their own risk.

Quick Link to Feedback Forum
Locked
hectikx
Posts: 37
Joined: Thu May 07, 2009 7:24 pm
Location: the sticks, norfolk

What sort of amplifier do I need for my two 150w Speakers?

Post by hectikx » Mon Sep 14, 2009 7:46 pm

Just copped some nice acoustic solutions speakers for proper cheap and the plan is too hook them up to my laptop with a converter to play tunes/play guitar through a guitar link.

Now I just need an amplifier to power them as my laptop aint. Anybody got any ideas on what to get? I'm a bit confused..

Saw these:

KAM KCA600 which offers 2x150w RMS for £109

http://www.decks.co.uk/products/kam/kca600

PRO-480 Stereo Power Amplifier which offers 2x240 for a cheaper £85

http://www.amazon.co.uk/PRO-480-Stereo- ... 18&sr=1-14

(What is the difference here?)

..... Then I've been suggested a 'Pioneer A 109 Amplifier' by a mate, but these only offer 60w for £110

http://www.lambda-tek.com/componentshop ... dID=B58265

What's the difference between the power amps and the ones like the Pioneer? Anybody got good suggestions for a budget amp which will do the job?

Thanks alot
booooombaclaaaaaaaaaart

scooterjack
Posts: 415
Joined: Mon Jan 12, 2009 4:38 am

Post by scooterjack » Mon Sep 14, 2009 7:55 pm

any amp that matches the wattage (2x150) and the OHM rating of your speakers will be fine

a stronger amp will work, but you risk blowing your speakers if you're not careful

vertex
Posts: 267
Joined: Fri Aug 21, 2009 12:29 am
Location: South West UK

Post by vertex » Mon Sep 14, 2009 8:15 pm

Void Infinite 8 mk 2 :twisted:

hectikx
Posts: 37
Joined: Thu May 07, 2009 7:24 pm
Location: the sticks, norfolk

Post by hectikx » Mon Sep 14, 2009 8:28 pm

cheers for tips Jack

fo Vertex, aint got that kind of money :P
booooombaclaaaaaaaaaart

User avatar
feasible_weasel
Posts: 5637
Joined: Mon Feb 26, 2007 9:07 am

Post by feasible_weasel » Mon Sep 14, 2009 8:49 pm

100 watts,so u dont blow ur speakers 8) 8)
Macabre Unit Image

hectikx
Posts: 37
Joined: Thu May 07, 2009 7:24 pm
Location: the sticks, norfolk

Post by hectikx » Mon Sep 14, 2009 9:10 pm

Yeah, good point.

What's the difference between a power amplifier and an amplifier?

Like a pioneer 100w would cost £300-400 whilst a 100w Power Amp you can pickup for £50-70
booooombaclaaaaaaaaaart

User avatar
feasible_weasel
Posts: 5637
Joined: Mon Feb 26, 2007 9:07 am

Post by feasible_weasel » Mon Sep 14, 2009 9:13 pm

hectikx wrote:Yeah, good point.

What's the difference between a power amplifier and an amplifier?

Like a pioneer 100w would cost £300-400 whilst a 100w Power Amp you can pickup for £50-70
i would presume a power amp is just part of a combination of a unit....
Macabre Unit Image

scooterjack
Posts: 415
Joined: Mon Jan 12, 2009 4:38 am

Post by scooterjack » Mon Sep 14, 2009 9:30 pm

hectikx wrote:Yeah, good point.

What's the difference between a power amplifier and an amplifier?

Like a pioneer 100w would cost £300-400 whilst a 100w Power Amp you can pickup for £50-70
Power Amp is usually used to distinguish from Pre Amp. For your use, since it's simple, i'd recommend a 'stereo receiver', that way you can hook up multiple sources without needing a mixer.

i'd hit up a local pawn shop and snag one with an amp that has the same wattage (within say 10ish watts) and same ohm (very important) rating as your speakers. probably be able to pick a pretty good one up for dirt cheap there



remember, too weak of an amp and you risk burning the amp out, to strong and you risk blowing your speakers


edit* - something similar to this that matches your specs - http://www.amazon.com/Teac-AG-790-AM-St ... 916&sr=1-7

User avatar
Maree-Jaine
Posts: 241
Joined: Tue Nov 20, 2007 11:20 pm
Contact:

Post by Maree-Jaine » Mon Sep 14, 2009 9:48 pm

Ohh this kinda saves me from making a new thread...sorry to hijack this one...

I just got some B&W DM6's and was wondering if anyone could point me in the direction of the right kinda amp...

The manual I found just says "suitable for amplifiers between 25 and 350 watts r.m.s. under normal domestic conditions." ...they're 8 Ohms.

That's a wide range of amps to be looking at...suggestions please? :)
I Makes Musics (Maree Jaine) : http://soundcloud.com/maree-jaine
I Takes Pictures (Dubbed Image) : http://www.flickr.com/photos/dubbedimage

scooterjack
Posts: 415
Joined: Mon Jan 12, 2009 4:38 am

Post by scooterjack » Mon Sep 14, 2009 9:55 pm

Toni wrote:Ohh this kinda saves me from making a new thread...sorry to hijack this one...

I just got some B&W DM6's and was wondering if anyone could point me in the direction of the right kinda amp...

The manual I found just says "suitable for amplifiers between 25 and 350 watts r.m.s. under normal domestic conditions." ...they're 8 Ohms.

That's a wide range of amps to be looking at...suggestions please? :)


i'd go for something around the 300 watt range (8ohm of course)


after that, it's personal preference. A better quality amp will usually last longer and sound better. Put as much or as little money into it as you see fit tbh.

you'll probably get a lot out of info from googling "amp for B&W DM6" :wink:

dj.ik
Posts: 46
Joined: Thu Mar 06, 2008 8:41 am
Location: LE10 --- BKK
Contact:

Post by dj.ik » Tue Sep 15, 2009 3:20 am

It's already been mentioned, and I bet someone can explain it much better than me but, the most important part about matching speakers and amps are the watts and ohms.

Your amp should have an output of 150 watts on each side, with ohm's that match your speakers.

If your amp is too powerful OR too weak, you risk blow your s**t up. Without researching again exactly why this happens, I can't give you technical reason, all I know is that it can happen both ways, too powerfull or too weak...

User avatar
Maree-Jaine
Posts: 241
Joined: Tue Nov 20, 2007 11:20 pm
Contact:

Post by Maree-Jaine » Tue Sep 15, 2009 11:43 am

Cheers for your help guys. Did a little research and asked around a few people and have been told I should be going for any decent amp which can supply 100wRMS into 8 Ohms (around 200wRMS@4 Ohms) and that should do the job.

As you've rightly said I don't wanna risk blowing em up...

I was recommended the older Studiomaster D or E series as they can be picked up quite cheaply by all accounts, so gonna do a bit of hunting around and see what I can find.

Cheers guys 8)
I Makes Musics (Maree Jaine) : http://soundcloud.com/maree-jaine
I Takes Pictures (Dubbed Image) : http://www.flickr.com/photos/dubbedimage

Locked

Who is online

Users browsing this forum: No registered users and 0 guests