Page 1 of 1
Recording Mixes/Sets
Posted: Tue Jan 03, 2012 7:38 pm
by MPanashe
OK so i got the CDJ 800's (MK1) and i dont even know how to record my sets had them for atleast 2 - 3 months now. I was told that i needed an audio interface but i haven't brought one yet just in case, Can someone help me? Thanks
Equipment -
Cdj 800's MK1
Berhinger DJX750
Re: Recording Mixes/Sets
Posted: Tue Jan 03, 2012 7:45 pm
by lowpass
Go from output of mixer into input in audio interface, this then usually connects to your computer by usb/firewire. Record using chosen software, cubase/logic etc
Mix done!
Re: Recording Mixes/Sets
Posted: Tue Jan 03, 2012 7:49 pm
by MPanashe
Alright, wouldn't the output from the mixer have to come out of ''Booth'' ?:S
Re: Recording Mixes/Sets
Posted: Tue Jan 03, 2012 7:59 pm
by lowpass
If the latency is low enough you could go straight from the outs and monitor through the speakers plugged into your computer.
One advantage I like about using the booth outs is that if you have a separate level for it you can adjust to make sure you don't clip the inputs on your interface
Re: Recording Mixes/Sets
Posted: Wed Jan 04, 2012 12:14 am
by charliefoy
I used to have that mixer, went from booth out to line in on my mac and it was fine. The mic channel doesnt get recorded though