Making Snares

hardware, software, tips and tricks
Forum rules
By using this "Production" sub-forum, you acknowledge that you have read, understood and agreed with our terms of use for this site. Click HERE to read them. If you do not agree to our terms of use, you must exit this site immediately. We do not accept any responsibility for the content, submissions, information or links contained herein. Users posting content here, do so completely at their own risk.

Quick Link to Feedback Forum
Locked
User avatar
Mr Thursday
Posts: 3
Joined: Tue Aug 07, 2012 6:03 pm
Location: London
Contact:

Making Snares

Post by Mr Thursday » Sat Sep 01, 2012 12:45 pm

I was wondering about how people make their snare sounds from those who do it from scratch.

Particularly interested if anyone has any tips on what oscillator waveforms in massive might be a good starting point for a snare sound or if you need to layer it with a sampled real snare.

Also anyone have any tips on how to make snares tail for ages

User avatar
Eridu
Posts: 377
Joined: Tue Dec 21, 2010 9:32 pm

Re: Making Snares

Post by Eridu » Sat Sep 01, 2012 1:16 pm

for long tail try to limit and gate the reverb on the snare. Reverb then limiter then gate to cut it of at a certain point. WIth limiter you bring the whole reverb tail up. FL limiter does all that, it has gain to bring it up, limiter next to it and gate.
you have to experiment to get it right.

User avatar
Mr Thursday
Posts: 3
Joined: Tue Aug 07, 2012 6:03 pm
Location: London
Contact:

Re: Making Snares

Post by Mr Thursday » Sat Sep 01, 2012 1:42 pm

Cheers Eridu - I'll give that a try.

brnsn
Posts: 4
Joined: Mon Aug 27, 2012 5:24 pm

Re: Making Snares

Post by brnsn » Sun Sep 02, 2012 3:13 pm

this is what i've made after playing with massive for a while: https://www.box.com/s/gkk6qgdq35r9nnbb20q7

i started with a sin/triangle click sound with a short decay envelope and added a noise shot with a slightly longer decay to it, then added some effects (hardclipper, some tube distortion & some reverb)
Last edited by brnsn on Sun Sep 02, 2012 3:53 pm, edited 1 time in total.

User avatar
Aphile
Posts: 212
Joined: Fri Nov 05, 2010 2:24 pm
Location: D[M]V 301

Re: Making Snares

Post by Aphile » Sun Sep 02, 2012 3:27 pm

when synthesizing drums, ITS ALL ABOUT ENVELOPES.

I can produce a natural sounding snare by using 200hz tone and white noise hp around 200. Pretty much everything else will be "shine" as those two will give you THE body of a snare.

User avatar
NinjaEdit
Posts: 1603
Joined: Sun Apr 01, 2012 11:16 am
Location: Western Australia
Contact:

Re: Making Snares

Post by NinjaEdit » Mon Sep 03, 2012 3:39 am

Massive has metallic noise intended for percussion. Maybe look at the snare presets and see what they did there.

A simple, very synthetic sound I like is to run a burst of white noise (or bright noise in Massive) into a distortion, then filter out the subbass/bass frequencies and very highs (leaving mids and highs). Possibly add some reverb.

There are three sounds which make up a snare; the note of the drum, which can be a sine wave, the rattle of the snare, which can be some whitenoise, and also the transient when the stick hits the skin (possibly a sine wave like somebody said). These are in longest-to-shortest order. You might have to have the pitches envelope, descending at the end.

User avatar
Mr Thursday
Posts: 3
Joined: Tue Aug 07, 2012 6:03 pm
Location: London
Contact:

Re: Making Snares

Post by Mr Thursday » Mon Sep 03, 2012 11:25 am

Loads of good stuff here - Thanks people. I will experiment with some of these things

Locked

Who is online

Users browsing this forum: No registered users and 0 guests